The pad in one look
Product
Round reusable (washable) nursing pad
Structure
Bamboo fiber face · microfiber absorbent core · waterproof PUL back, finished with soft white binding
Prints
Nine plaid-family designs: tartan, houndstooth, gingham, checkerboard, fine check, chevron
Diameters
10 / 12 / 14 cm - one artwork covers all three; other sizes on request
Custom MOQ
300 pieces per design
Sampling
3 days to lock the artwork, physical sample within 7 days, counted from artwork confirmation
Branding
Custom print, wash label, retail bag, bulk carton - OEM/ODM
［Embed video - 10月26日.mp4, 30s main film: nine plaid pads in a circle, seven-day countdown］
Most sourcing conversations about reusable nursing pads start with absorbency and end with price. What buyers rarely see is the week in between - what actually happens after artwork is sent and before a physical sample lands on the desk.
We filmed that week on our round plaid pad line and cut it into the 30-second film above. This article walks the same seven days in words: where the plaid goes, what the three layers each do, what 300 pieces buys, and which documents travel with the sample.
Why a circle - and why the binding stays white
Ask where returns actually come from in this category and the answer is rarely "it did not absorb enough." It is a pad that shifts, bunches, or shows an edge through clothing. A circle has no corners to lift. The binding stays white for the same reason: it disappears under a shirt and helps the pad hold its shape wash after wash.
The circle also changes where print quality is decided. Most factories print a flat sheet, then cut circles wherever the die lands - the pattern sits wherever it sits. On this line the centreline is marked on the artwork at the final diameter first, and the cut follows the mark. If you have ever opened a sample box and found the plaid sliding off-centre, that was a cutting problem, not a printing one.
Three layers, three jobs
The order matters more than the materials list:
●Bamboo fiber face - sits against the skin. Soft, breathable, and it naturally inhibits bacterial growth, which helps the pad stay fresh between washes.
●Microfiber core - absorbs and locks in what passes through the face.
●Waterproof PUL back - stops moisture at the last layer, printed side out.
Reverse the order and the pad either feels wet or leaks. One honest note: PUL does not breathe the way cotton does. In hot climates we recommend the bamboo face against the skin and a change interval that suits the climate rather than a fixed hour count.
［Embed video - 4.mp4: labeled layer diagram, PUL / microfiber / bamboo fiber］
［Embed video - 3.mp4: layer diagram beside the sewing floor, split screen］
Our wash routine before a print is approved: 60°C, normal detergent, no softener, air dry. Then we check three things - whether the print bleeds into the white binding, whether the circle stays round, and whether the bamboo face pills. Nothing dramatic happens. That is the point: a print that survives ten boring cycles survives a customer.
The seven days, shot by shot
Day 1–3: the artwork goes on the circle. Your print is placed at final scale on the actual diameter - a houndstooth at 8 mm reads completely differently from the same print at 15 mm once it is cut into a 10 cm circle. The 10 / 12 / 14 cm rings are checked on paper before a single cut happens.
［Embed video - 1.mp4: pad on the diameter rings, pen tip at the centreline］
Day 4–7: cut, bind, stitch, ship. The sample is cut to the marked centreline, bound, stitched and bagged.
［Embed video - 2.mp4: white binding stitched on the sewing machine］
Why seven days is a schedule and not a slogan: cutting, binding and packing sit under one 3,000 m² roof. The delay in a three-week quote is usually not the sewing - it is the handoff between an outside print shop and a sewing floor. Removing the handoff removes the wait.
What 300 pieces actually buys
Three hundred pieces is an odd number to defend, so here is the reasoning. Below it, the setup time on cutting and binding eats the margin. Above it, buyers commit stock before they have tested a print in their market. At 300, a factory can justify a print, a cut plan, a binding jig and a packing spec - and a brand can run two or three prints across three sizes without an oversized first order.
On the floor, a 300-piece run is two cartons of cut panels, one binding run, and a packing table with a person at each end. Once that setup exists, the second order moves in a fraction of the time. Sizes are made to order, not held as stock.
［Embed video - 6.mp4: production floor, "300 pieces opens a run."］
One logistics note that decides landed cost more than unit price does: we ship under 3,000 pieces by express and above it by sea. A 300-piece first order almost always flies; a 5,000-piece reorder almost always sails.
The folder that travels with the sample
Compliance paperwork is the slowest part of a first order, so the documents go out with the sample, not after the PO - and each one says what it actually covers:
OEKO-TEX (fabric level)
The fabric. The certificate is held at fabric level, not presented as a factory certificate.
SGS test report
The specific parameters tested, not the whole product.
BSCI / Sedex audits
Working conditions at the factory - social compliance, not product safety.
PPWR test result
A packaging-compliance test result for the pads themselves, result PASS.
None of this replaces your own lab test or your market's own rules. It means the folder is complete on day one.
［Embed video - 5.mp4: 12 cm and 14 cm side by side, "One family. Three sizes."］
［Embed video - 7.mp4: closing card - OEM/ODM · MOQ 300 · OEKO-TEX · SGS · BSCI · Sedex］
One floor, one range
The same floor makes cloth diapers, onesies and changing pads - six departments from R&D and sales to production, quality inspection, packing and after-sales, 50+ workers, fourteen years in baby and mother-care products. For a nursing pad buyer the value is boring and useful: the stitch line that holds your pad's shape is the same one running across the rest of the baby line, so a retail shelf can be built from one supplier with one white binding and one dye lot.
How to start
Send three things:
1.Your target market and channel - Amazon, your own webstore, pharmacy retail, or wholesale.
2.Size and print direction - a print file, or even a reference photo.
3.A first-quantity estimate.
We come back within one working day with a quote, an artwork schedule and a sampling timeline. Sample orders are supported. Ask for the certificate folder together with your sample, and read each document's scope before you plan the launch.
Request a sample through the contact page at anandiapers.com, or message us on the channel where you found this article.
